SnapmakerReleased October 2025

Snapmaker U1

Name: Snapmaker U1
Brand: Snapmaker

An affordable four-toolhead tool changer for hobbyists who want low-waste multicolor printing without a purge-heavy single nozzle.

$749typical US price

Check price at Snapmaker vs Creator 5

Bundles and current deals

Official US store price during Oct 2026 Halloween sale (strike-through $999); regular price after Apr 2026 retail launch reported as $899. Optional Top Cover $149.

Build volume to scale, in mm, beside a 20 cm cube. Every printer on the site is drawn at the same scale.

Build volume: 19.7litres
Top speed: 500mm/s
Max colours: 4
Frame: Open frame

Will Wright’s take

Based on the specs and price

Top pick

“The tool changer that made low-waste colour affordable.”

Four real toolheads means almost no purge waste, and it calibrates the offsets for you. It's open-frame and limited on high-temp materials. For colourful prints without the filament waste, it's my favourite under $1,000.

Buy the U1 if

Multi-colour with minimal waste

Skip it if

You print ABS or nylon a lot

How it stacks up

Against 41 other filament printers

Price$749#16 of 42, most expensive first

$179$2,299

Build volume19.7 L#18 of 42

5.8 L125 L

Top speed500 mm/s#34 of 37

180 mm/s1000 mm/s

Hotend temperature300 °C#31 of 42

260 °C370 °C

What it does well

4 physical toolheads with far less purge waste than single-nozzle systems
Automatic toolhead offset calibration
Low price for a tool changer

Worth knowing

ABS/ASA/PA/PC need the optional Top Cover
300°C hotend and 100°C bed limit high-temp materials
Small 3.5-inch screen

Full specifications

Every number, in one place

From Snapmaker, checked October 30, 2026

Price: $749
Released: October 2025
Technology: Filament (FDM)
Motion system: Tool changer
Build volume: 270 × 270 × 270 mm
Top speed: 500 mm/s
Acceleration: 20,000 mm/s²
Max colours: 4 with SnapSwap 4-toolhead changer
Toolheads: 4
Frame: Open frame
Hotend, max: 300 °C
Bed, max: 100 °C
Weight: 18.2 kg
Materials: PLA, PETG, TPU, PVA, PCTG
Features: 4 independent preheated toolheads (~5 s swap), automatic toolhead offset calibration, mesh bed leveling, input shaping, pressure advance calibration, 2 MP chamber camera with AI failure detection, 2.4 GHz Wi-Fi, 3.5-inch touchscreen, filament runout detection, RFID filament recognition, power-loss recovery, optional Top Cover for enclosed printing